2286-2
To delete a Data Bank record3.Press C to move the flashing in the sequence shown below.
1.In the Data Bank Mode, use D or B to display the record you want to delete.
2.Hold down A until the cursor appears in the display.HourMinutes
3.Press D and B at the same time. The message OCLR � appears in the display,
indicating that the record was deleted.4.Press D to increase the selected digits and B to decrease them. Holding down
?After the record is deleted, the cursor appears in the text area, ready for input.either button changes the setting at high speed.
4.Input a new record or press A to exit the setting screen.5.After you set the alarm time, press A to exit the setting screen.
?The format (12-hour and 24-hour) of the alarm time matches the format you select
in the Timekeeping Mode.
?When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon.
DAY COUNTER MODE
To stop the alarm
The Day Counter Mode lets you count the number of days from the TimekeepingPress any button to stop the alarm after it starts to sound.
ModeOs current date to a specific target date.
This watch has five Day Counter records, each of which can be assigned up to 8To switch a daily Alarm or the Hourly Time Signal on and off
characters of text and a target date. Whenever the date specified by a day counter1.In the Alarm Mode, press D to select an alarm or the Hourly Time Signal.
matches the date of the Timekeeping Mode (regardless of the day counterOs year2.When the alarm or Hourly Time Signal you want is selected, press B to switch it on
setting), the DAYS indicator flashes on the Timekeeping Mode and Dual Time Modeand off.
screen. In the Day Counter Mode, the DAYS indicator flashes on the screen of the?If any alarm is on, the Alarm On indicator is shown on the display when you
particular day counter whose date matches the date of the Timekeeping Mode.change to another mode.
?The initial default date for all Day Counters is January 1, 2001.?If the Hourly Time Signal is on, the Hourly Time Signal On indicator is shown in
Mode indicatorany mode.
Positive count value To test the alarm
indicates a future date, In the Alarm Mode, hold down B to sound the alarm.
while a negative value ?Holding down B to test the alarm also changes the Daily Alarm or Hourly Time
Textindicates a past date.Signal on/off settings.
Year - Month - DayDAYS indicator
Target date
Number of daysSTOPWATCH MODE
1/100 secondThe Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
?The day counter on the display when you exit the Day Counter Mode appears first Mode indicatorhours, 59 minutes, 59.99 seconds. You can use the EL
the next time you enter the Day Counter Mode.
backlight by pressing L at any time while the stopwatch
is operating.
Recalling Day Counter Data
In the Day Counter Mode, use D and B to scroll through the day counters.
To set the target date
1.In the Day Counter Mode, use D or B to display the day counter you want to set.
2.Hold down A until the flashing cursor appears in the text area. This indicates the
input screen.
3.Press C to move the flashing in the sequence shown below.
?Holding down C to move the cursor at high speed.
Seconds
Press .Hours
1st digit8th digitMinutes
Elapsed time measurement
DayMonthYear
4.While the cursor is in the text area, use D or B to scroll through characters at theStartStopRe-startStopClear
current cursor position. Characters scroll in the sequence shown below. Holding
down either button scrolls at high speed.Split Time measurement
Press .Press .
(Space)A to Z0 to 9StartSplitSplit releaseStopClear
Split time and 1st-2nd place times
5.While the cursor is in the date area, press D to increase the number or B to
decrease it. Holding down either button changes at high speed.
?To clear a Day Counter record, press D and B at the same time while theStartSplitStopSplit releaseClear
cursor is in either the text area or number area. The message OCLR� appears on
First runner Second runner Record time of
the display, the characters in the text area are deleted, and todayOs date is set asfinishes.finishes.second runner.
the target date. After the clear operation is complete, you can create a new recordRecord time of
by changing the date setting.first runner.
6.After you make the settings you want, press A to exit the input screen.
?The date can be set within the range of January 1, 1940 to December 31, 2039.
DUAL TIME MODE
ALARM MODEHome timeThe Dual Time Mode lets you keep track of the time in
Mode indicatoranother time zone.
Mode indicator
Hourly time signal on indicator
Alarm on indicatorTo set the dual time
Press D to increase the time by 30 minutes or B to
decrease by 30 minutes.
?Holding down either button changes at high speed.
?Press A to set current time as the dual time. You can
then make any changes you want.
Current timeCurrent time?The format (12-hour and 24-hour) of the Dual Time
matches the format you select in the Timekeeping
Mode.
Alarm numberHourSeconds
AM indicator
Minutes
HourMinutesAM indicator
You can set up to five alarms. When a Daily Alarm is turned on, the alarm sounds for?Changing the Timekeeping Mode setting causes a corresponding change in the
20 seconds each day when the current Timekeeping Mode time matches the alarmDual Time Mode time. If you ever need to change the Timekeeping Mode setting
time setting. Note that the alarm setting has no relation to the Dual Time Mode time.(say to set the time back three hours when you move from New York to Los
Press any button to stop the alarm after it starts to sound. When the Hourly TimeAngeles), you should then make the necessary adjustment to the Dual Time Mode
Signal is turned on, the watch beeps every hour on the hour.time (setting it back three hours, in this case).
?The alarm on the display when you exit the Alarm Mode appears first the next time
you enter the Alarm Mode.
To set the alarm time
1.In the Alarm Mode, use D to display the number of the alarm you want to set.
Alarm 1Alarm 2Alarm 3Alarm 4Alarm 5
: 00 (Hourly Time Signal)
2.Hold down A until the hour digits start to flash on the display, indicating the setting
screen.
?At this time, the alarm is turned on automatically. |
ACEC
