Module No. 22882288-1
GENERAL GUIDE
?Press C to change from mode to mode.
?Pressing L in any mode illuminates the display for about 3 seconds.
?If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen.
?If you do not perform any operation for a few minutes in the Data Bank Mode or Day Counter Mode, the watch automatically reverts to the normal timekeeping screen.
Timekeeping ModeData Bank ModeDay Counter ModeAlarm ModeStopwatch ModeDual Time Mode
Press C.
TIMEKEEPING MODEDATA BANK MODE
Year - Month - Day?Press D to toggle between 12-hour and 24-hourRemaining memoryThe Data Bank Mode lets you store up to 25 records,
timekeeping. Mode indicatoreach with a name (up to eight characters) and a phone
DST on indicator
?With 12-hour timekeeping, times between midnight andnumber (up to 12 digits). Data is automatically stored into
Day of weeknoon are indicated by A (am), while times between noonalphabetical order based on the name data. You can
and midnight are indicated by P (pm).recall records by scrolling through them on the display.
?The A and P indicators do not appear when you are?The record on the display when you exit the Data Bank
using 24-hour timekeeping.Mode appears first the next time you enter the Data
Bank Mode.
PM
indicatorSecondsText area
Minutes Number area
Hour
To input a new Data Bank record
To set the time and date1.In the Data Bank Mode, use D or B until the new data
1.While in the Timekeeping Mode, hold down A until thescreen appears.
seconds digits flash on the display, indicating the?If the new data screen does not appear when you
setting screen.press D and B, it means that memory is full. To
store another record, you will first have to delete a
record stored in memory.
2.Hold down A and a cursor appears on the text area.
[ New Data Screen ]
2.Press C to move the flashing in the sequence shown below.3.Use D or B to scroll through characters at the current cursor position. Characters
scroll in the sequence shown below.
SecondsDSTHour
Press .Press .
DayMonthYearMinutes(Space)A to Z0 to 9
3.While the seconds setting is selected (flashing), press D to reset it to 00. If you
press D while the seconds setting is in the range of 30 to 59, the seconds are?Holding down either button scrolls at high speed.
reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of4.When the character you want is at the current cursor position, press C to move the
00 to 29, the minutes count is unchanged.cursor to the right.
?While the DST* setting is selected (DST on indicator is flashing), press D to5.Repeat the steps 3 and 4 to input the rest of the characters.
toggle it on (on) and off (OF). If DST setting is on, the DST on indicator is shown?You can input up to eight characters for the name, though only three characters
in the Timekeeping Mode, Day Counter Mode and Alarm Mode.are visible at a time. If the name you input has fewer than eight characters, use
4.While any other setting is selected (flashing), press D to increase it or B toC to move the cursor to the eighth space (which means you would press C
decrease it. Holding down either button changes the setting at high speed.three times after inputting a five-character name).
5.After you make the settings you want, press A to exit the setting screen.?Holding down C to move the cursor at high speed.
?The day of the week is automatically set in accordance with the date.6.After you input the name, use C to move the cursor to the number area.
?The date can be set within the range of January 1, 2000 to December 31, 2039.?Pressing C while the cursor is located at the eighth character of the text area
?The watchOs built-in full automatic calendar automatically makes allowances foradvances to the number area. Pressing C while the cursor is located at the 12th
different month lengths and leap years. Once you set the date, there should be nodigit of the number area returns to the text area.
reason to change it except after the replacement of the watchOs battery.7.Use D or B to scroll through characters (hyphen, numbers, space) at the current
*Daylight Saving Time (DST), which is also sometimes called Osummer time�cursor position on the number area. Characters scroll in the sequence shown
advances the time for one hour, as is the custom in some areas during thebelow.
summer. Remember that not all countries or even local areas use Daylight SavingPress .
Press .
Time.
0 to 9(Space)
?Holding down either button scrolls characters at high speed.
ABOUT THE BACKLIGHT?You can input up to 12 digits for the number.
8.After inputting the name and number of the record, press A to store it and exit the
Press L to illuminate the display for about 3 seconds.setting screen.
?The backlight of this watch employs an electro-luminescent (EL) light, which loses?The display can show only three name characters at a time. Longer names scrolls
its illuminating power after very long term use.continuously from right to left. The symbol O � indicates that the character to the
?Frequent use of the backlight shortens the battery life.left is the last, and the character to the right is the first.
?The watch emits an audible sound whenever the display is illuminated. This does
not indicate malfunction of the watch.To recall Data Bank data
?The illumination provided by the backlight may be hard to see when viewed underIn the Data Bank Mode, press D to scroll forward through the stored data items or B
direct sunlight.to scroll in reverse.
?The backlight automatically turns off whenever an alarm sounds.?Holding down either button scrolls at high speed.
To edit Data Bank data items
1.In the Data Bank Mode, use D or B to display the data you want to edit.
2.Hold down A until the cursor appears in the display.
3.Use C to move the cursor to the character you want to change.
?Holding down C to move the cursor at high speed.
4.Use D or B to change the character.
?Holding down either button scrolls characters at high speed.
?See step 3 of OTo input a new Data Bank record� for information on inputting
name characters, and step 7 for inputting number characters.
5.After making the changes that you want, press A to store them and exit the setting
screen.
To delete a Data Bank record
1.In the Data Bank Mode, use D or B to display the record you want to delete.
2.Hold down A until the cursor appears in the display.
3.Press D and B at the same time. The message OCLR � appears in the display,
indicating that the record was deleted.
?After the record is deleted, the cursor appears in the text area, ready for input.
4.Input a new record or press A to exit the setting screen. |